Trimming Your Word Count

Many authors face a common issue when publishers express interest in their books, and that issue is word count. “It’s too long.” That’s a terrifying thing to hear when you’ve poured your heart and soul into a story, revised it umpteen times, and finally, painfully, thankfully finished it. You spent hours—days, weeks, even months—building your world and piecing it all together. Everything had a purpose. If you had an editor and beta readers, they helped you to trim out the excess and focus in on what matters, so how do you then chop out even more?

One of the first things authors tend to do is analyze the aspects of their story and try to figure out what subplots can go, what scenes can be condensed—basically, they try to figure out what content to cut. But that doesn’t always have to be your first move. There are a few other things you can start with that can easily bring down your word count without touching the worldbuilding you worked so hard on.


Cut down your word count easily by aiming to remove one word per sentence.

One sentence at a time

Let’s start with the best advice I can give you: aim to take out one word per sentence.

That’s it. One word from each sentence. Your book has thousands of sentences, so imagine what will happen when you take out one word from each: you’ll cut down on thousands of words without ever touching the core of your storytelling. What’s better, you’ll learn how to write more concisely with a tighter structure and more action. You’d be surprised just how slack we can become with our writing—we fill it up with filler words, adverbs, passive voice, wordy phrasing, and all kinds of extra stuff.

Let’s take a closer look at some of those “extras” and see if we can knock a few out, shall we?


Filler words

Filler words can be taken out without affecting the meaning of the sentence. The most common filler word is “that” and you probably have quite a few to remove; I know I usually do. Take a look at this handy infographic and see if there are other common filler words you can cut from your work. Keep in mind that not every instance of these words will need to be removed. Use your best judgment to analyze whether or not the word is necessary. (After all, there’s a huge difference between she loved him and maybe she loved him.)

30 Filler Words You Can Cut Out of Your Writing (Infographic)


An adverb is a word that describes how an action was performed. It usually ends with -ly (though not always). I have to admit, I’m not one of those “never use adverbs” people. However, authors commonly misuse adverbs to “tell” what a character’s emotion is rather than show it.

He walked away angrily.

This is blatant telling, but it’s also an opportunity to trim down our word count. Consider the verb being used and the tone that the adverb is lending to it, and see if you can find a stronger verb that expresses that.

He stomped away.

And with that, we’ve easily cut a word from our word count.


Passive voice

In the simplest terms, this is when the action of a sentence is being done to the subject rather than the subject doing the action.

Passive: He was tormented by his demons.

In that line, “he” is the subject, but he’s not doing the tormenting. An active version will make sure the subject is doing the action.

Active: His demons tormented him.

In the revised line, “his demons” are the subject and they are doing the tormenting. Not only is the second sentence much more concise and flows better, but we cut out two words, as well.

Finding passive voice can be tricky, and some people will tell you that if you’ve used the word “was,” you’ve got passive voice. However, not every use of “was” is passive. The key is to pay attention to the word immediately after.

If “was” is followed by a verb that ends in -ed, it’s almost certainly passive.

She was consumed by her grief.
They were covered in blood.
The table was cluttered with papers.

All of these sentences can be revised to be more active by ensuring the subject does the action.

Her grief consumed her.
Blood covered them.
Papers cluttered the table.

We just removed two words per sentence with a quick switch-up!

If “was” is followed by a verb that ends in -ing, it’s not passive voice, it’s just wordy and often with a passive tone.

She was looking through the window.

However, at least half the time, it can still be revised to cut your word count by taking out the “was” and changing the verb to -ed.

She looked through the window.

Use your best judgment to determine if the tighter phrasing will fit without changing your meaning.


Wordy phrasing

We all use wordy phrasing sometimes, using ten words when we can say it in five. As you read through your sentences, look out for anything that can be condensed, such as the previous example’s “was” combined with an -ing verb. A big one for me is sentences that start with “There was/were.” These can almost always be trimmed down.

There were six tables that had food on them.

That sentence can easily be reduced in a few ways.

Six tables had food on them.
Six tables held food.

Then there are words like began, started, and continued. Unless the fact that the action is just now starting makes a real difference, they can be safely removed. In the following sentence, we were able to remove two words without even breaking a sweat.

He began to clear off the table, carefully stacking dishes in his arms.
He cleared off the table, carefully stacking dishes in his arms.

As you go through dialogue, check for how your characters are speaking. There’s a good chance you can cut some words in there. Not every character speaks perfectly and formally, especially with their friends, so check for places where contractions would flow naturally. Check for how often your characters are saying each other’s names when they speak. That’s always an easy one to cut.

Hello, Tim! It is so great to see you.
John! Why, hello yourself! You look well.
Thank you, Tim.
Anytime at all, John.

See what I mean? The last two names can come out and “It is” can be contracted, leaving us with natural, flowing dialogue.

You can even get into more personalized things, like actions that characters repeat too often. For example, if a character smiles every other paragraph, some of those smiles can be removed.


It doesn’t take much to start lowering lower your word count. 😉 Just take it one sentence at a time. With practice, your writing will improve and you’ll find that you have fewer words that need removing.

Having said all that, I’d like to conclude that I fully encourage you to take a brief break from your work before revising, use multiple beta readers, and get your books professionally edited. Having a fresh set of eyes on your story can do wonders not just for your word count but for the quality of your words as well.


10 Comments on “Trimming Your Word Count

    • You can always write. Some things do have deadlines, but writing in general is something you can do anytime, anywhere. If you really love it, you never have to stop. ^_^ This might be the last year for your current thing, but you can write something else afterward. There will never be enough stories in the world. 😍

      Liked by 1 person

  1. These tips are definitely helpful.
    Especially the one about removing a word or two from every sentence. I never even thought about that! It definitely would add up!
    I’m always looking for helpful tips about how to become a better writer, and so far I’ve noticed that you’ve got solid advice. *thumbs up*

    Liked by 1 person

Got a comment? Tell me below!

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: